Automatic Control Maize Flaking Roller Machine for Consistent Corn Processing with Safety Interlocks and Efficient Design

• After-sales Service: Support
• Warranty: 1 Year
• Type: Maize Flaking Roller Machine
• Application: Flour, Beans, Wheat
• Voltage: 380V
• Appearance: Vertical
• Condition: New
• Customized: Customized
• Factory: Yes
• OEM/ODM: Yes
• Transport Package: Wooden Box Packing
• Specification: Customized Packing
• Trademark: Customized logo
• Origin: China
• HS Code: 84378000
• Production Capacity: 5000sets/Year
• Package Size: 0.00cm * 0.00cm * 0.00cm
• Package Gross Weight: 0.000kg

Product Description

Product Description

Capacity	3.5t/h
Power of main motor	18.5KW/1pc ×2
Roller size	Φ600×1000(mm)
Speed of roller	310r/min
Flake thickness	0.25-0.35mm
Power of main motor for feeding roller	0.55KW
Speed of feeding roller	Stepless speed chang
Power of main motor for oil pump	2.2KW
Pressure of oil pumping system	3.0-4.0Mpa(Depending on the output)
Size	1953×1669(3078 for counting the motors)×1394(mm)(length × width × height)
Weight	Nearly 7 ton in total.

The compact structure with high strength, stable performance and low noise, operation is convenient with easy maintenance and low failure rate.

 

1.Roller

    It adopts high-nickel-chromium-molybdenum alloy centrifugal roll from China First Heavy Industries with hardness of HS75º-78ºand thickness 30mm, which ensures the strength of roller's inner support. Our company has achieved patented technology for shaft assembly process, the roller body is with a filling hole for adding heat conduction oil, which promise uniform heat recycling and the roll body will not deform. And the  rolled flake is uniform, the roller service life is prolonged to be twice.

2.Bearing seat

Square bearing seats for rollers can move along the smooth rail, getting the two rollers engaged or disengaged, which is controlled by energy-saving PLC oil pump station.

Equipped with Bearings,  Geared motors, Siemens high-efficiency energy-saving motors.

3. Location limit control

The location limit control is designed to avoid collision of the two rollers; The specially designed big and small hand wheels working together fulfills this purpose.

With this design, the equipment is easier to operate, controlling is more precise and flaking is more stable.

4. Feeding system

The speed of the toothed feeding rollers is controlled by a converter, ensuring feeding evenly along the roller. 

5. Blocking device

Its swaying is controlled by oil piston, fulfill the purposes of blocking or discharging materials; Slight adjusting depends on the calibration, which give two advantages: one is that the oil piston is strong enough to block materials efficiently, and the other is that referring to the calibration, hand wheel can give precise slight adjustment, very easily.

6. Magnetic separating device

Equipped with permanent magnetic bar to prevent damage to the roll from iron in the material; 

The magnetic bar can be set outside the feeder when it needs cleaning, this way makes cleaning easy and the iron scrap will not fall inside machine. 

Inner pneumatic cleaning system

Compressed air is brought in to blow and clean the parts intermittently where materials accumulated. According to the quantity of materials accumulated, the pneumatic valve can be adjusted properly to keep the machine clean inside.

 Outer scraper

The scraper is fixed on the base frame by means of spline shaft, and operates can adjust it outside the machine, very convenient; A location limit is designed for the scraper, and after scraper reaching to the right location, it barely wears out any more, which lengthen its work life largely; It can be pulled out along smooth rail when it needs replacing, quite simply.

Pointed blocking plate

It is casted and can keep working for several years without wearing out; operators can move it up, down, left and right freely outside the machine, ensuring no leakage of small particles.

Intermittent pumping station
The pumping station complete with PLC control system works in an intermittent way. It works like this, when the system pressure rises to the upper limit, the oil pump stops automatically to keep a proper pressure; and when the pressure falls under the lower limit, the oil pump automatically starts and increases the pressure back to normal in 2 or 4 seconds.
Comparing to the traditional pump station, the intermittent type has some advantages:
keeping the proper pressure for a much longer time, saving energy obviously; the real working time of the pump is quite short, so it has a longer work life than traditional type; Working in the intermittent way can keep case and oil temperature almost constant without rising too high, so the system is more stable than the traditional type;

Reliable transmission device

The machine equipped with double motors which run the fixed roller and the mobile roller by means of a narrow V type belt, twice more efficient than traditional C type belt, ensuring it working stably;

The pulley is standard WOT type, equipped with a taper sleeve for fast replacement, easy for installation and matainance;

Beside, each set of drive transmission is equipped with a tension device, a fully enclosed protective cover and a warning sign.

Main product

Company Profile

Zhengzhou Bianliang machinery company specializes in the production of grain machinery, feed machinery and rice milling machinery for more than 20 years. 
No matter what kind of accessories you need, our products can match them wondfully. Of course, the surface color, length and thickness can be customized if you need. 
With excellent materials,  advanced design, precise dimensions and considerate service to ensure your grain machine smoothly runs at high speed. 
Zhengzhou Bianliang company will always be your trustworthy friend.

Workshop Display

Exhibition

Certifications

Packaging & Shipping

FAQ

1.Q: Are you the manufacturer?
A :Yes, We are a professional flour milling machine manufacturers.
 
2.Q :Will you help to install the machines?
A :Yes, our engineers can indicate installation,test running, and training local operators. Engineers available to service machinery overseas after-sales Service
 
3.Q : Do you accept small order?
A :  Yes,We accept small order , the MOQ is 1.
 
4.Q: How do I make payment for my order?
A: You make payment by taking the proforma invoice and our bank details,you can use T/T(bank transfer) and L/C to finish the payment.
 
5.Q: What's the warranty time?
A: Our warranty time is 12 months, so you can trust us and the quality of our machine.